The HydroPower is powered by hydraulic pressure from the power steering pump. No external vacuum pump required on low vacuum high performance motors. No'small bore' master required. Firewall and valve cover clearance is increased.Frame mounted clearance is increased. Frame mounted HydroPower are the same width as a master cylinder, giving additional exhaust clearance. The HydroPower can be fitted any where a vacuum booster will fit. It can use stainless braided hoses or rubber type and brackets are available for most applications.
The HydroPower uses fluid pressure from the existing power steering pump. The average power steering pump puts out from 800psi to 1400psi. The HydroPower uses this pressure that is always circulating through it, to convert to pressure to apply against the master cylinder. The output of the HydroPower is affected by three factors.
We prefer that the pedal ratio be between 6:1 to 7:1. The pressure output from the pump.
The master cylinder bore diameter. These are factors necessary to design the system that will work for a given application. It is imperative that the system be clean.
Any residual metallic sediment laying in an old pump or steering box, will be floated up and through the system when the fluid comes through on start up. If any of this sediment lodges in the relief valve of the pump, there will be no pressure from the pump. This will result in hard steering and no power brakes. Kit includes: HydroPower brake booster. PLEASE NOTE: The vehicle compatibility chart above cannot be guaranteed!
Pictures displayed are a representation of the item and may not be the exact item you will receive. The item "Hydropower Hydraulic Brake Assist Booster Kit Black" is in sale since Wednesday, September 6, 2017.
This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Master Cylinders & Parts". The seller is "performanceonline-pol" and is located in Corona, California.
This item can be shipped to United States, Mexico, Germany, Japan.