For sale is one Crazy Boy trailer gate assist kit. This kit includes 1 spring and 1 bracket with assorted eye bolts and mounting hardware. Mounting bolts are 3/8 , so you will need to drill 2 holes on each side or the bracket can be welded on. Also you will need to drill a hole on the gate to mount the eye bolts.What makes this gate assist different from all the rest is that the Crazy Boy Kit has a bracket. It makes the mounting point higher, giving the springs more leverage.
The bracket has several different holes to adjust the tension on the spring. If you have a small gate you should only need one lift.
With medium or large gate you will need two kits. Please ask if you are unsure what you need. Please include gate size, material used and material thickness and I'll get back to you ASAP! Most all other kits require parts to be welded on which can be expensive.
This kit is 100% bolt on. But can be welded instead of bolting if u want. With the gate up, Set the bracket on the rail and hold the spring up to the gate. If the spring reaches higher than the gate, move the bracket back till the eye bolt on the spring is level with the top of the gate. Drill a hole in the tip of the gate for the springs eye bolt then with the spring semi tight drill the holes to mount the bracket.
Then put the bolts in with the nuts and washers and your done! ONLY THE LIFT ASSIST ISKits are built and put together after they are bought. Use at your own risk. There is a bungee cord in the spring to keep it in place if the spring was to break. If for any reason the bungee cord is broken it must be replaced.
The item "CRAZY BOY Utility landscape Trailer Gate Ramp Tailgate Lift Assist KIT" is in sale since Monday, September 16, 2019. This item is in the category "eBay Motors\Parts & Accessories\RV, Trailer & Camper Parts\Exterior". The seller is "crazyboyendeavors" and is located in Martinsburg, West Virginia. This item can be shipped to United States.